After a new cell is assembled and filled with electrolyte, it still needs to go through a series of controlled processes to gradually establish an internal state suitable for operation.
Among these, formation is a crucial step. It typically includes initial charge and discharge processes, influencing the electrode interface and material state by controlling current, voltage, temperature, and time. How a battery ages later on is linked to this pre-factory experience.
01 | Formation Establishes the Initial Interface Between Electrode and Electrolyte
Taking a graphite anode as an example, during the initial charge, some electrolyte components react on the anode surface to form a solid electrolyte interphase film, abbreviated as SEI. This film can be understood as a protective layer gradually built up on the electrode surface. Ideally, it allows lithium ions to pass through while restricting electrons from continuing to participate in electrolyte decomposition. The composition, coverage, and transport properties of the interface film affect side reactions and resistance in subsequent cycles. Therefore, the formation process is not only charging the cell but also altering the internal operating environment of the cell.
02 | Forming the Protective Layer Comes at an Initial Cost
Interface formation consumes part of the lithium and electrolyte. There is usually a difference between the charge input in the first cycle and the charge subsequently output.
Initial Coulombic efficiency is the ratio of first-cycle discharge capacity to charge capacity. It helps observe initial irreversible processes, but it needs to be interpreted in conjunction with the material system and specific reactions.
Consider a hypothetical example: if 100 units of charge are input for the first time and 92 units are subsequently output, the initial Coulombic efficiency is 92%.
The source of the 8-unit difference needs further analysis. When evaluating a formation protocol, one should also continue to observe interface stability, gas generation, impedance, and long-term capacity retention.
03 | Current and Time Alter the Reaction Experience
During formation, current affects the rate at which the electrode potential changes and also how long the cell stays in different potential ranges.
Different electrolyte components have different reaction conditions, and changes in residence time may alter the interface formation process. For certain cathodes, the initial charge also involves activation and adjustment of the material structure.
Therefore, formation optimization requires consideration of the interplay among materials, electrolyte, and process. A program suitable for one type of cell needs to be re-validated when applied to another system.
Literature on battery fabrication and evaluation methods also emphasizes that control of manufacturing and testing conditions is related to the reproducibility of results.
Methods literature >
https://www.nature.com/articles/s43246-022-00286-8
04 | Research Links Formation to Cathode Structure
A study published in Nature, titled Fast formation to reinforce lithium-rich cathodes, discusses the effect of fast formation on lithium-rich cathodes.
The researchers proposed that, under their material and testing conditions, part of the lithium retained after fast formation can suppress unfavorable lattice deformation through a "self-pinning" effect, improving the reversibility of subsequent reactions.
This case extends the role of formation from interface formation further to material structure regulation. Its conclusions need to be understood in the context of lithium-rich cathodes and the corresponding process conditions.
Original research >
https://www.nature.com/articles/s41586-025-09553-3
05 | Formation Protocols Require Comprehensive Evaluation
When factories select a formation program, they simultaneously consider initial-cycle efficiency, gas generation, thickness change, internal resistance, cycle performance, as well as process time and manufacturing cost.
For study notes, one can record a formation study in a single sentence:
"Which current or voltage program was changed, what internal state was affected, and which performance metric was ultimately improved."
This article discusses the manufacturing process before the cell leaves the factory. The phone or car battery that consumers receive has typically already completed the corresponding formation process.
The design of battery lifespan begins already at the manufacturing stage.
Source: Pre-employment Battery Notes